![]() ![]() However please note that this is extremely dangerous since anyone will be able to access, modify and delete your files. If you do not want to deal with logging in you can always make the share publicly available by changing the config file to say: public=yes To let Samba know that “pi” is a network user run the command: sudo smbpasswd -a piĪnd enter pi’s password twice (default: raspberry).Īt this point we can now login to the share from our Windows computer – use Domain: raspberrypi, User: pi and Password: raspberry (unless you changed the password) as you can see below: In this case the valid user is the user called “pi”. Notice how we tell Samba that public access is not allowed via “public=no” – this means that anyone wanting to access the shared folder must login with a valid user. rootRASPBERRY:/home/pi aptitude show samba Package: samba State: installed Automatically installed: no Version: 2:4.2. Scroll to the bottom and add the following: If you update your Samba version to 4.6.4 (4.5.10 or 4.4.14 if you are on older release branches), the exploit can’t be used. Open the file /etc/samba/smb.conf using the command: sudo nano /etc/samba/smb.conf With the folder created we can now tell the Samba software to share it on the network. First we need to install Samba Set a password for Samba where username should be replaced with your username (maybe pi). To create a folder called “share” in your home directory do the following: mkdir ~/share Next step is to create the folder you would like to share. The default workgroup in Windows 7 is WORKGROUP. You can use anything as your workgroup name as long as it is alphanumerical and matches the workgroup you would like to join. Read through the file and make sure you have the following parameters set: workgroup = WORKGROUP Installing the software is easy – login to your Raspberry Pi and run: sudo apt-get install samba samba-common-binĪfter installation configure the software by opening the file /etc/samba/smb.conf using the command: sudo nano /etc/samba/smb.conf The Samba software package implements the SMB protocol and provides support for the Windows naming service (WINS) and for joining a Windows Workgroup. The software providing the secret sauce this time is called Samba. Shares are resources, directories in our case, that Samba shares over a network to which any computer connected can. To share network folders to a Windows computer we need to install some special software on the Raspberry Pi. The raspberry pi is configured to have a hostname smbshare with a user pi and a password of raspberry. We continue with adding some Samba shares. A Windows computer (for this guide we will be running Windows 7).Access to the Raspberry either via keyboard and a monitor or remotely.A SD Card flashed with the Raspbian OS (Here is a guide if you need).Whether you need to transfer media files to the Raspberry Pi or you want to use the raspberry as a simple Network-Attached Storage (NAS) device, this guide will show you how to enable file sharing of a folder on the Raspberry Pi running the Raspbian OS. Sharing files over the network is often very useful.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |